The following caution applies to blue LED models:

CAUTION:

Risk Group 2: Possibly hazardous optical radiation emitted from this product.

Do not stare at the operating lamp. May be harmful to the eyes. Risk Group 2 (RG 2) products generally

do not pose a realistic optical hazard if aversion responses limit the exposure duration or where lengthy

exposures are unrealistic.

- IEC 62471

The following caution applies to ultraviolet models:

CAUTION:

Risk Group 2: UV Emitted from this product.

Eye or skin irritation may result from exposure. Use appropriate shielding and eye protection. Risk

Group 2 (RG 2) products generally do not pose a realistic optical hazard if aversion responses limit the

exposure duration or where lengthy exposures are unrealistic.

- IEC 62471

The following caution applies to LEDIS50L5-xx infrared models:

CAUTION:

Risk Group 1: IR Emitted from this product.

Use appropriate shielding or eye protection. Risk Group 1 (RG 1) products are safe for most use

applications, except for very prolonged exposures where direct ocular exposures may be expected.

- IEC 62471

Specifications

Supply Voltage and Current

Operating voltage: 12 to 30V dc

Strobe voltage: 5 to 30V dc @ 15 mA max.

Current draw: 400 mA at 12V, 160 mA at 30V

Supply Protection Circuitry

Protected against reverse polarity and transient

voltages

Light Source

Three high-intensity LEDs; see models table for color

temperature or wavelengths

Strobe

Optically isolated, 40kHz max strobe frequency

5 µs minimum on time

Useful Life

When operating within specifications, output will

decrease less than 30% after 50,000 hours for visible

and IR models; 20,000 hours for UV models.

Construction

Black anodized aluminum housing; acrylic window;

nickel-plated QD connector or PVC-jacketed cable;

black zinc-plated steel mounting nut

Mounting:

30x1.5 mm thread base mount

Environmental Rating

IEC IP67, IP69K per DIN 40050-9

NOTE: Do not spray the cable with a

high-pressure sprayer or cable damage

will result.

Connections

Integral 5-pin M12/Euro style QD or 2 m (6.5 ft)

integral cable, depending on model; 5-pin connecting

cordset required for QD models

Operating Conditions

−20 °C to +50 °C (−4 °F to +122 °F)

95% maximum relative humidity (non-condensing)

Vibration and Mechanical Shock

All models meet Mil. Std. 202F requirements method

201A (vibration: 10 to 60 Hz max., double amplitude

0.06", maximum acceleration 10G). Also meets IEC

947-5-2; 30G 11 ms duration, half sine wave.

Storage Temperature

−40 °C to +70 °C (−40 °F to +158 °F)

Certifications

LED..S50L.. High-Intensity Spot Light

2

www.bannerengineering.com - tel: 763-544-3164

P/N 158249 Rev. E