| 数据搜索系统,热门电子元器件搜索 |
|
VSC8504-02 数据表(PDF) 95 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC8504-02 数据表(HTML) 95 Page - Microsemi Corporation |
|
95 / 131 page ![]() Registers VMDS-10507 VSC8504-02 Datasheet Revision 4.2 84 4.6.14 Enhanced LED Control The following table contains the bits to control advanced functionality of the parallel and serial LED signals. 10:8 Clock frequency select R/W Select output clock frequency: 000: 25 MHz output clock 001: 125 MHz output clock 010: 31.25 MHz output clock 011–111: Reserved 000 7:6 Reserved RO Reserved 5:4 Clock squelch level R/W Select clock squelch level: 00: Automatically squelch clock to low when the link is not up, is unstable, is up in a mode that does not support the generation of a recovered clock (1000BASE-T master or 10BASE-T), or is up in EEE mode (100BASE-TX or 1000BASE-T slave). 01: Same as 00 except that the clock is also generated in 1000BASE-T master and 10BASE-T link-up modes. This mode also generates a recovered clock output in EEE mode during reception of LP_IDLE 10: Squelch only when the link is not up 11: Disable clock squelch. Note: A clock from the SerDes or Cu PHY will be output on the recovered clock output in this mode when the link is down. Note: A clock from the SerDes or Cu PHY will be output on the recovered clock output in this mode when the link is down. When the CLK_SQUELCH_IN pin is set high, it squelches the recovered clocks regardless of bit settings. 3 Reserved RO Reserved 2:0 Clock selection for specified PHY R/W 000: Serial media recovered clock 001: Copper PHY recovered clock 010–111: Reserved 000 Table 87 • Enhanced LED Control, Address 25G (0x19) Bit Name Access Description Default 15:8 LED pulsing duty cycle control R/W Programmable control for LED pulsing duty cycle when bit 30.12 is set to 1. Valid settings are between 0 and 198. A setting of 0 corresponds to a 0.5% duty cycle and 198 corresponds to a 99.5% duty cycle. Intermediate values change the duty cycle in 0.5% increments 00 Table 86 • Recovered Clock 2 Control, Address 24G (0x18) (continued) Bit Name Access Description Default |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |