** This data sheet is only for models selection. For business, engineering specification by model must be used.

Industrial PC

4-2

-Jim-

AC to DC, 400W

SNP-AX40

NOV. 2016

+5V

2A

30A

40A

+4.8V~+5.2V

50mV

±1%

±5%

+12V

0.2A

12A

15A

+11.4V~+12.6V

120mV

±1%

±5%

SNP-AX40

-12V

0A

1A

-11.4V~-12.6V

120mV

±1%

±5%

75%

-5V

0A 0.5A

-4.75V~-5.25V

50mV

±1%

±5%

+3.3V

1A

25A

30A

+3.14V~+3.47V

50mV

±1%

±5%

+5Vsb

0A

2A

+4.75V~+5.25V

50mV

±1%

±5%

Output Specifications:

Notes:

1.

Each output can provide up to max. load separately when the power supply starts up. To exceed the max. output power

continuously is not allowed.

2. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range.

3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.

4. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load.

5. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47µF capacitor at

rated load and nominal line.

6.

Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit

of main output at rated load and nominal line.

7. Efficiency is measured at rated load and nominal line.

MODEL

OUTPUT

LOAD

VOLTAGE

RIPPLE

LINE

LOAD EFFICIENCY

NO.

RAIL

MIN. RATED MAX. PEAK

ACCURACY

NOISE

REG.

REG.

TYPICAL