testo 435

Accessories

Part no.

Transport and Protection

Additional accessories and spare parts

Printer and Accessories

Calibration Certificates

0516 0035

0554 0549

0520 0071

0520 0006

0520 0005

0520 0024

0520 0004

0520 0034

0520 0010

0520 0033

Service case for basic equipment of measuring instrument and probes, dimensions: 400 x 310 x 96 mm

Testo fast printer IRDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries, for printing out

measurements on site

ISO calibration certificate/temperature

meas. instr. with surface probe; calibration points +60°C; +120°C; +180°C

ISO calibration certificate humidity

Calibration points 11.3 %RH and 75.3 %RH at +25 °C

ISO calibration certificate pressure

differential pressure; 5 points distributed over meas. range

ISO calibration certificate velocity

hot wire, vane anemometer; calibration points 0.3; 0.5; 0.8; 1.5 m/s

ISO calibration certificate velocity

hot wire, vane anemometer, Pitot tube; calibration points 1; 2; 5; 10 m/s

ISO calibration certificate velocity

hot wire, vane anemometer, Pitot tube; calibration points 5; 10; 15; 20 m/s

ISO calibration certificate/light

Calibration points 0; 500; 1000; 2000; 4000 Lux

ISO calibration certificate/CO

2

CO

0516 0435

0515 0028

0554 0568

0554 0447

0554 0410

0554 0610

0554 0415

0563 4170

0554 0440

0554 0453

0554 0660

0554 0756

0554 0761

Service case for measuring instrument, probe and accessories, dimensions 520 x 380 x 120 mm

Lithium battery button cell, CR2032 AA batteries for radio handle

Spare thermal paper for printer (6 rolls), permanent ink

measurement data documentation legible for up to 10 years

Plug-in mains adapter, 5 VDC 500 mA with European adapter, 100-250 VAC, 50-60 Hz

testovent 410, volume flow funnel, Ø 340 mm/330x330 mm, incl. case

External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech. batteries with individual cell charging and charge

control display, incl. impulse trickle charging, integrated discharge function, with built-in international mains plug,

100-240 V, 300 mA, 50/60 Hz

testovent 415, volume flow funnel, Ø 210 mm/210x210 mm, incl. case

testovent 417 funnel set for plate outlets (Ø 200 mm) and funnel for ventilator (330 x 330 mm) for ingoing and

outgoing air

Connection hose; silicone; 5 m long; max. load 700 hPa (mbar)

Connection hose silicone-free for differential pressure measurement, length 5 m, load up to maximum 700 hPa, (mbar)

Control and adjustment set for Testo humidity probes, salt solution with 11.3% RH and 75.3% RH, incl. adapter for

Testo humidity probes, quick checks or calibration of humidity probe

Sintered PTFE filter, Ø 12 mm, for corrosive media, High humidity range (long-term measurements), high flow velocities.

Adhesive material for fixing and sealing

We measure it.

0554 0641

Stainless steel sintered filter, pore size 100 μm, probe protection in dusty atmospheres or higher flow velocities

testo-435-P04

22.01.2014

13:12

Seite 4