TS324

1-6

2003/12 rev. A

TS324

Quad Operating Amplifier

Supply Voltage Range 3 V to 32V

Quad Channel Amplifier

General Description

The TS324 contains four independent high gain operational amplifiers with internal frequency compensation. The four

op-amps use a split power supply. The device has low power supply current drain, regardless or the power supply

voltage. The low power drain also makes the TS324 a good choice for battery operation.

When your project calls for a traditional op-amp function, now you can streamline your design with a simple single

power supply. Use ordinary +5V common to practically any digital system or personal computer application, without

requiring an extra 15V power supply just to have the interface electronics you need.

The TS324 is a versatile, rugged workhorse with a thousand-and-one uses, from amplifying signals from a variety of

transducers to dc gain blocks, or any op-amp function. The attached pages offer some recipes that will have your

project cooking in no time.

The TS358 is offered in 14 pin SOP-14 and DIP-14 package.

Features

Single supply operation: 3V to 32V

Low input bias currents

Internally compensated

Common mode range extends to negative supply

Single and split supply operation

Ordering Information

Part No.

Operating Temp.

Package

TS324CD

DIP-14

TS324CS

0 ~ +70

SOP-14

Block Diagram

Absolute Maximum Rating

Supply Voltage

Vcc, Vcc/Vee

+32 or ±16

Vdc

Differential Input Voltage (note 1)

32

Vdc

Input Common Mode Voltage Range (note 2)

Input Forward Current (note 3)

Iif

-0.3 to 32

50

Vdc

mA

Output Short Circuit Duration

Isc

Continuous

mA

Operating Junction Temperature Range

0 ~ +125

Storage Temperature Range

-65 ~ +150

NOTE :

1. Split Power Supplies.

2. For supply. Voltages less than 32V for the PJ324 the absolute maximum input voltage is equal to the supply voltage.

3. This input current will only exist when the voltage is negative at any of the input leads. Normal output states will

reestablish when the input voltage returns to a voltage greater than -0.3V.

Pin assignment:

1. Output A

14. Output D

2. Input A (-)

13. Input D (-)

3. Input A (+) 12. Input D (+)

4. Vcc

11. Gnd

5. Input B (+)

10. Input C (+)

6. Input B (-)

9. Input C (-)

7. Output B

8. Output C

SOP-14

DIP-14