E3Z-LT/LR/LL

3

(Refer to Dimensions on E39-L/E39-S/E39-R.)

Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter

*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.

*2. Cannot be used for Standard Connector models.

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

(Refer to Dimensions on XS3)

Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter

*1. The connector will not rotate after connecting.

*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.

Appear-

ance

Model

Quantity

Remarks

Appear-

ance

Model

Quantity

Remarks

E39-L153

1

Mounting Brackets

E39-L98

1

Metal Protective Cover Bracket

E39-L104

1

E39-L150

1 set

(Sensor adjuster)

Easily mounted to the aluminum

frame rails of conveyors and

easily adjusted.

For left to right adjustment

E39-L43

1

Horizontal Mounting Bracket

E39-L151

1 set

E39-L142

1

Horizontal Protective Cover

Bracket

E39-L44

1

Rear Mounting Bracket

E39-L144

1

Compact Protective Cover

Bracket (For E3Z only)

Size

Cable

Appearance

Cable type

Model

M8

Standard

2 m

4-wire

XS3F-M421-402-A

5 m

XS3F-M421-405-A

2 m

XS3F-M422-402-A

5 m

XS3F-M422-405-A