LIS2DW12 datasheet(12/66 Pages) STMICROELECTRONICS

12 / 66 page

2.5

Absolute maximum ratings

Stresses above those listed as “absolute maximum ratings” may cause permanent damage to the device. This is

a stress rating only and functional operation of the device under these conditions is not implied. Exposure to

maximum rating conditions for extended periods may affect device reliability.

Table 9. Absolute maximum ratings

Symbol

Ratings

Maximum value

Unit

Vdd

Supply voltage

-0.3 to 4.8

Vdd_IO

I/O pins supply voltage

-0.3 to 4.8

Vin

Input voltage on any control pin

(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)

-0.3 to Vdd_IO +0.3

APOW

Acceleration (any axis, powered, Vdd = 1.8 V)

3000 g for 0.5 ms

10000 g for 0.2 ms

AUNP

Acceleration (any axis, unpowered)

3000 g for 0.5 ms

10000 g for 0.2 ms

TOP

Operating temperature range

-40 to +85

°C

TSTG

Storage temperature range

-40 to +125

°C

ESD

Electrostatic discharge protection

2 (HBM)

Note:

Supply voltage on any pin should never exceed 4.8 V.

This device is sensitive to mechanical shock, improper handling can cause permanent damage to the part.

This device is sensitive to electrostatic discharge (ESD), improper handling can cause permanent damage to the part.

LIS2DW12

Absolute maximum ratings

DS11811 - Rev 8

page 12/66

LIS2DW12 数据表(PDF) 12 Page - STMicroelectronics

LIS2DW12 数据表(HTML) 12 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表下载