F9473PC

3M™ VHB™ Adhesive Transfer Tape, F9473PC has excellent long term holding

power with much higher adhesion strength to metal than typical pressure

sensitive adhesives. F9473PC is ideal for use in many industrial applications on

high surface energy materials, to replace rivets, spot welds, liquid adhesives

and other permanent fasteners.

468MP/

467MP

3M Adhesive Transfer Tapes 468MP and 467MP are popular choices for graphic

attachment applications due to their excellent quality, consistency and

durability. In addition, 468MP and 467MP exhibit excellent clarity, high

temperature performance, solvent chemical and moisture resistance as well as

excellent shear and peel strength on high surface energy materials that

minimises edge lifting and slippage of parts. 468MP and 467MP provide some

repositionability when bonding to plastic parts (not metal) which allows graphics

to be lifted and repositioned if initial alignment is incorrect.

9665

3M Adhesive Transfer Tape

9665 is ideal for bonding together a wide variety of

similar and dissimilar materials such as metals, glass, wood, paints and many

high surface energy plastics.

9665 is particularly suitable for bonding papers and

is ‘acid free’ or pH neutral for long term mounting of prints and photographs

9485PC

3M Adhesive Transfer Tape 9485PC is a fibre reinforced adhesive which is ideal

for very high bond strength to most surfaces. 9485PC can withstand high

temperatures and is a good choice for applications requiring adhesion to both

high and low surface energy plastics, paints and powder coatings and slightly

oily metals.

Tape

Description/

Features

950

3M Adhesive Transfer Tape 950 is a medium firm pressure sensitive adhesive

that has very high initial adhesion and good shear holding power. 950 bonds to

a wide variety of surfaces including ‘difficult to stick to’ low surface energy

plastics like polyethylene and polypropylene.

Format

Available in 12.7mm, 19mm, 25.4mm, 38mm, 50.8mm and 305mm x 55m rolls

Custom width rolls are available upon request

Application

Technique

• Apply between 10˚C and 40˚C.

• Ensure surfaces to be bonded are clean, dry and well unified.

• Firm application pressure helps develop better adhesive contact and improves bond

strength.

• Converters of wide webs should refer to the Technical Bulletin “Lamination

Techniques for converters of Laminating Adhesives”

Application

Ideas

• Lamination of foams, fabrics and papers

• Web splicing for paper and corrugated board

• Attaching lightweight signs, nameplates and plaques

• Production of promotional signage or sample boards

• Graphics attachment

• Mounting prints and photographs

2