 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
IS25LP016D-RKLE 数据表(PDF) 18 Page - Integrated Silicon Solution, Inc |
|
|
|||||||||||||||||||||||||||||
IS25LP016D-RKLE 数据表(HTML) 18 Page - Integrated Silicon Solution, Inc |
|
|
18 / 114 page  IS25LP016D IS25WP016D Integrated Silicon Solution, Inc.- www.issi.com 18 Rev. B10 03/09/2020 6.2 FUNCTION REGISTER Function Register Format and Bit definition are described in Table 6.5 and Table 6.6. Table 6.5 Function Register Format Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 IRL3 IRL2 IRL1 IRL0 ESUS PSUS Reserved Dedicated RESET# Disable Default 0 0 0 0 0 0 0 0 or 1 Table 6.6 Function Register Bit Definition Bit Name Definition Read /Write Type Bit 0 Dedicated RESET# Disable Dedicated RESET# Disable bit “0” indicates Dedicated RESET# was enabled “1” indicates Dedicated RESET# was disabled R/W for 0 R only for 1 OTP Bit 1 Reserved Reserved R Reserved Bit 2 PSUS Program suspend bit: “0” indicates program is not suspend “1” indicates program is suspend R Volatile Bit 3 ESUS Erase suspend bit: "0" indicates Erase is not suspend "1" indicates Erase is suspend R Volatile Bit 4 IR Lock 0 Lock the Information Row 0: “0” indicates the Information Row can be programmed “1” indicates the Information Row cannot be programmed R/W OTP Bit 5 IR Lock 1 Lock the Information Row 1: “0” indicates the Information Row can be programmed “1” indicates the Information Row cannot be programmed R/W OTP Bit 6 IR Lock 2 Lock the Information Row 2: “0” indicates the Information Row can be programmed “1” indicates the Information Row cannot be programmed R/W OTP Bit 7 IR Lock 3 Lock the Information Row 3: “0” indicates the Information Row can be programmed “1” indicates the Information Row cannot be programmed R/W OTP Note: Once OTP bits of Function Register are written to “1”, it cannot be modified to “0” any more. Dedicated RESET# Disable bit: The default status of the bit is dependent on part number. The device with dedicated RESET# can be programmed to “1” to disable dedicated RESET# function to move RESET# function to Hold#/RESET# pin (or ball). So the device with dedicated RESET# can be used for dedicated RESET# application and HOLD#/RESET# application. PSUS bit: The Program Suspend Status bit indicates when a Program operation has been suspended. The PSUS changes to “1” after a suspend command is issued during the program operation. Once the suspended Program resumes, the PSUS bit is reset to “0”. ESUS bit: The Erase Suspend Status bit indicates when an Erase operation has been suspended. The ESUS bit is “1” after a suspend command is issued during an Erase operation. Once the suspended Erase resumes, the ESUS bit is reset to “0”. IR Lock bit 0 ~ 3: The default is “0” so that the Information Row can be programmed. If the bit set to “1”, the Information Row can ’t be programmed. Once it sets to “1”, it cannot be changed back to “0” since IR Lock bits are OTP. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
