6.17 Switching Characteristics—5-V Supply

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX UNIT

Propagation delay time

@100kbps

See Figure 7-1

11

18

ns

PWD

7 (4)

ns

Channel-to-channel output skew time(2)

Same-direction channels

6

ns

Part-to-part skew time(3)

6

ns

Output signal rise time

See Figure 7-1

4.5

ns

Output signal fall time

4.5

ns

Disable propagation delay, high-to-high impedance

output

See Figure 7-1

18.6

25.8

ns

Disable propagation delay, low-to-high impedance

output

18.6

25.8

ns

Enable propagation delay, high impedance-to-high

output for ISO674x

14.2

21.1

ns

Enable propagation delay, high impedance-to-low

output for ISO674x

14.2

21.1

ns

tPU

Time from UVLO to valid output

data

Time from UVLO

to valid output

data

300

us

Default output delay time from input power loss

Measured from the time VCC goes

below 1.2V. See Figure 7-3

0.1

0.3

us

Time interval error

1

ns

(1)

Also known as pulse skew.

(2)

direction while driving identical loads.

(3)

direction while operating at identical supply voltages, temperature, input signals and loads.

(4)

Based on limited data

www.ti.com

ISO6741

SLLSFJ6 – AUGUST 2020

Copyright © 2020 Texas Instruments Incorporated

Submit Document Feedback

13

Product Folder Links: ISO6741