cPCI-6S10

6U CompactPCI 10 Gigabit Ethernet Switch Blade

Features

●

24-port fully managed Gigabit Ethernet switch

●

ARM Cortex-A9 processor integrated in Broadcom BCM56150

switch

●

Layer 2/3 switching with advanced support for VLANs, QoS

and IPv6

●

Two 10 Gigabit Ethernet SFP+ uplink ports

●

Supports based on PCIMG 2.9 (System Management

Specification)

●

Pre-installed ADLINK PacketManager accelerates packet

processing

Specifications

Switch Fabric

Broadcom BCM56150 24-port Gigabit Ethernet switch with two 10 Gigabit

SFP+ uplink ports, integrated ARM Cortex-A9 processor

PHY

Broadcom BCM54685 Octal port 1000BASE-T PHY

Broadcom BCM5221 100M PHY

CPU

ARM Cortex-A9 CPU integrated in Broadcom BCM56150

Flash

8MB SLC QSPI NAND flash

PICMG standards

PICMG 2.0 CompactPCI R3.0

PICMG 2.9 System Management R1.0

PICMG 2.16 Packet Switch Backplane R1.0

Ethernet

Twenty 1000BASE-T ports to J3/J5 for node slots

Three 1000BASE-T ports to front panel

Two 10 Gigabit ports to front panel for uplink

One 10/100/1000BASE-T port to J4 for optional applicaiton

One 10/100BASE-TX port PHY to front panel for remote management

Management

500 kB on-chip frame buffer

DSCP remarking for both IPv4 and IPv6

Jumbo frame support

Programmable classifier for QoS, IEEE802.1p and DSCP for IPv4 and IPv6

8k MAC addresses and 4k VLANs (IEEE 802.1Q)

Flexible link aggregation compliant to IEEE 802.3ad

Full-duplex flow control (IEEE 802.3x) and half duplex back pressure,

symmetric and asymmetric multiple protocol support: IEEE 802.1D, IEEE

802.1w, IEEE 802.1s and IEEE 802.1X

COM

One RJ-45 RS-232 console port on front panel for management

OS

Broadcom SDK under Linux (Please contact ADLINK for other OS support)

LEDs

Power Good, 24-port 1000BASE-T, 2-port 10 Gigabit

Hardware Monitor

Monitors voltages of CPU, switch and PHY by IPMI

Reset Button

Passive reset button on front panel for blade reset

Form Factor

6U 4HP (single slot)

233.35mm x 160mm (L x W)

Operating Temperature

0°C to +60°C for air cooled

Storage Temperature

-50°C to +100°C

RH Humidity

95% non-condensing

Shock

15G peak-to-peak, 11ms duration, non-operating

Vibration

2Grms random vibration between 5-500Hz in 3 axis, operating

Certification

CE/ FCC Class A