Silicom Ltd. Connectivity Solutions

Page 5

Internal Fan Fail

– Blinking Red.

Switches

Push button to power the system (PWR).

From ON to OFF

–

Press and hold this push button during 4 second will perform firmware shutdown

press and hold this push button during 8second will perform power shoutdown.

From OFF to ON

– simple push will turn system on.

Reset (RST):

Small micro-switch stand behind hidden hole :

Press and hold for more than 1 sec will perform restart to the system.

Connectors:

Management Ports:

RJ-45 Ethernet (MGNT ETH)

RJ-45 serial port (RS-232)

USB port (RS-232)

IS40M40G4BP-QS4 (50um)

Fiber Gigabit Ethernet Technical Specifications

– (40GBase-SR4) Adapters:

IEEE Standard / Network

topology:

Fiber Gigabit Ethernet, 40GBase-SR4 (850nM)

Data Transfer Rate:

40G per port

Cables and Operating

distance:

Multimode fiber:50um

*50m maximum on OM3 MMF

*75m maximum on OM4 MMF

Theoretical Distance

– Defined as half a distance

Output Transmit Power:

Typical: -2 dBm

Minimum:

– 7.6 dBm

Optical Receive Sensitivity:

Typical: -13 dBm

Maximum: -12. dBm

Insertion Loss ( Passive:

Normal Mode)

Typical: 1.2 dB

Maximum: 1.8 dB

Insertion Loss ( Passive:

Bypass Mode)

Typical: 1.2 dB

Maximum: 2.1 dB

Power Consumption:

18.5W

Size:

102.2mm x161.9 mm x 40.5 mm (4.02” x 6.37” x 2”)

Wide x Depth x Height

Operating Humidity:

0%

–90%, non-condensing

Operating Temperature:

0°C

– 40°C (32°F – 104°F)

Storage Temperature:

-20°C

–65°C (-4°F–149°F)

EMC Certifications:

Class A FCC / CE / BSMI

Safety:

UL

MTBF*:

75 years

According to Telcordia SR-332 issue 3, environment GB, temperature 40 °C

IS40M40G4BP-QS4 and : LED and Connector Specifications

LEDs:

Green LED per port (Network / Monitor)

Activity : LED will blink.