Silicom Ltd. Connectivity Solutions

Page 2

Bypass routing circuitry is activated.

The IS40 can be configured using:

•

Simple CLI configuration management via a serial communication console port, Ethernet port using Telnet or SSH.

•

Web interface management interface.

•

SNMP

The Silicom IS40 Bypass switch includes centralized management to all Bypass segments in the box.

The IS40G includes two redundant 90

– 240 V AC power supply or two redundant -48 DC power supply.

Figure: 1

– Front panel view of IS40

2X10 Gigabit Bypass Modules and 1X40 Gigabit Module

Key Features

•

Self generating heartbeat pulses

– No driver or management port is required to generate pulses

•

Sets to Bypass when it detects in-line system failure

•

Sets to Bypass when it detects in-line system link failure

•

Sets to Bypass when it detects in-line software application system hang

•

Sets to Bypass on Power failure

•

Sets to Normal when it detects in-line system recovery

•

Double Safe Bypass architecture with two routing circuitries

•

Centralized managements

•

Two on Board Watch Dog Timer (WDT) Controllers

•

Software programmable time out interval

•

Software Programmable WDT Enable / Disable

•

Independent Bypass / Normal / Tap operation in every module

•

Supports up to three 40G Bypass segment in a 1U chassis

•

Supports TAP mode of operation

•

Simple CLI configuration management via serial port

•

Telnet management interface via network management port

•

SSH management interface via network management port