Introduction

The USB-2405 is a 24-bit high-performance dynamic signal

acquisition USB module equipped with 2 or 4 analog input channels

providing simultaneous sampling at up to 128 kS/s per channel.

The USB-2405 also features software-selectable AC or DC coupling

input configuration and built-in high precision 2 mA excitation

current to measure integrated electronic piezoelectric (IEPE)

sensors such as accelerometers and microphones.

The USB-2405 delivers high precision, DC and dynamic

measurement performance with very low temperature drift.

The onboard 24-bit Sigma-Delta ADC supports anti-aliasing filtering,

suppressing modulator and signal out-of-band noise and providing

usable signal bandwidth of the Nyquist rate, making it ideal for

high dynamic range signal measurement in vibration and acoustic

applications.

The USB-2405 supports digital and analog trigger sources and

flexible trigger modes, including post, delay, middle, gated, and

pre-triggering for efficient data acquisition with no need for post-

processing. The USB-2405 is USB bus-powered and equipped with

BNC connectors and removable spring terminals for easy device

connectivity.

Driver and SDK

●

MAPS Core, LabVIEW, C/C++, Visual Studio.NET

Supported Operating System

●

Windows 7/10

●

Linux

Features

●

Hi-Speed USB 2.0

●

USB bus powered

●

24-bit Sigma-Delta ADC with built-in anti-aliasing filter

●

2 or 4-ch simultaneous sampling analog inputs, up to 128kS/s

●

AC or DC input coupling, software selectable

●

Analog or digital triggering

●

Supports 2mA excitation output on each analog input channel

for IEPE sensor measurement

●

Full auto-calibration

Software Utility

●

ADLINK Connection Explorer (ACE)

Device management utility

(Install MAPS Core from driver download)

●

U-Test

Ready-to-use functional testing utility

●

Phoenix GM Lite (Orderable)

Machine Condition Monitoring Software

Ordering Information

●

USB-2405/S

4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module

●

USB-2405/2AI

2-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module

●

USB-2405/OEM

4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module,

OEM board-level version, no enclosure

Standard Shipped Accessories

●

4-pin removable spring terminal

●

2 m USB Type A to USB Mini-B cable with lockable connector

●

Module stand

●

Rail-mount kit

Optional Accessories

●

Phoenix GM Lite

License Key for Phoenix GM Lite

●

ICP Accelerometer IMI_603C01

ICP Accelerometer IMI_603C01, 100mV/g, 0.5 to 10kHz, 2-pin

conn. w/ 10-ft cable and magnetic mount

USB-2405 Series

2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module

USB-2405/S

USB-2405/2AI