Family Group

ISO Statement

3M™ Durable Tire Label Material FVT30

Converting

• Use Talc powder or cornstarch on the edges of the rolls if they become too tacky.

• Pattern coating of the adhesive is available and recommended for improved processability. For details concerning pattern coating, please contact your local 3M

Sales Representive.

• Die cutting/matrix stripping of this material could lead to problems with excessive ooze and is not recommended. The preferred method of converting is butt cutting.

No matter the cutting method used, be sure to utilize loose winding during both press and rewind operations.

Storage and Shelf Life

• Important – Do not store the material banded. Break the steel banking on the pallet upon receipt.

• Do not store the material double stacked.

• Store in a cool area if possible during summer months.

• It is best not to ship over a weekend in summer months. Try to specify a ship date that will get the material directly to you during the week.

• Rolls with excessive edge bleed are most likely to be found on the top layer directly under the wooden pallet top. These rolls can be salvaged by rewinding on a table

top rewinder and then using Talc powder on the edges. This should be done as soon as possible.

• Recommended storage conditions are 72°F (22°C) and 50% relative humidity.

To obtain best performance, use this product within 6 months from date of manufacture.

Trademarks

3M is a trademark of 3M Company.

References

Safety Data Sheet (SDS)

https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=FVT30

FVT30

FVT36

Facestock

Soft White Vinyl TC2

Soft White Vinyl TC2

Facestock Thickness

(mm)

0.089

0.089

Adhesive

G1120 Tire 30

G1120 Tire 36

Liner

50# SC Remoist – 20 1.4

50# SC Remoist – 20 1.4

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.