3M Fire Protection Products

Page 2 of 3

Performance and Typical Physical

Properties

Colors Available

Silver and Red

Unit

One (1) Steel collar with 3M™ Fire Barrier FS-195+

Intumescent Wrap Strip

Sizes Available

Nominal 6 in. (168.3 mm actual)

Installation Techniques

Equipment: 3M™ Fire Barrier Plastic Pipe Device may be applied in conjunction with

mechanical/masonry fasteners and steel washers. Power tools and hand tools may

be used for fastening material onto assemblies.

Preparatory Work: 3M™ Fire Barrier Plastic Pipe Device does not need any

preparatory work. Holes may be drilled in concrete assemblies for fastening.

Installation Details: Tightly wrap 3M™ Fire Barrier Plastic Pipe Device around

penetrating item. Device to be held in place using the closure tab. Device to be

fastened to the assembly using mechanical/masonry fasteners in conjunction with

steel washers.

Limitations: It is recommended that 3M™ Fire Barrier Plastic Pipe Device is applied

when the product is at a temperature between 40°F (4°C) and 110°F (43°C). It is

recommended that 3M™ Fire Barrier Plastic Pipe Device be applied when the

ambient air temperature is 32°F (0°C) or higher. Do not apply 3M™ Fire Barrier

Plastic Pipe Device to wet or frost-coated surfaces or to areas that are continuously

damp or immersed in water.

Maintenance

No maintenance is expected to be required when 3M™ Fire Barrier Plastic Pipe

Device is installed in accordance with manufacturer’s installation instructions. Once

installed, if 3M™ Fire Barrier Plastic Pipe Device is damaged, the following

procedure will apply: damaged device must be removed. Device must be replaced

with new product.

Storage and Shelf Life

3M™ Fire Barrier Plastic Pipe Device should be stored indoor in dry conditions. It

is recommended that the product remains in heated storage above 40°F (4°C)

prior to installation.

3M™ Fire Barrier Plastic Pipe Device shelf life is indefinite when stored indoor in

dry conditions above 40°F (4°C) and below 100°F (38°C ).

Availability

Available from 3M Authorized Fire Protection Products Distributors.

For additional technical and purchasing information, call 1-800-328-1687 or visit 3M.com/firestop.

Safe Handling

Consult Safety Data Sheet prior to handling and disposing of 3M™ Fire Barrier Plastic Pipe Device.

Technical Information

The technical information, recommendations and other statements contained in this document are

based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of

such information is not guaranteed.

Product Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use

and performance of a 3M product in a particular application. Given the variety of factors that can affect