Physical

Dimensions

100mm x 60mm x 58mm

Weight

200g with 3 AAA batteries

Microphone

Model Type

High sensitivity microphone with auto gain control and breath detection technology

Speakers

Diameter

Front: 40mm / Rear: 20mm

Frequency Response

Front: 300-4000Hz / Rear: 500-4000Hz

Communications

Wireless Communications

Harris XL series radios and matching Remote Speaker Microphones (RSM). Support for

additional field radio models pending.

Facepiece Voice Enhancement

Amplifies and enhances facepiece voice intelligibility

Part Number

201276-11

EPIC 3 RDI Voice Amplifier for use with Motorola APX radios, Open Bracket Configuration

201276-12

EPIC 3 RDI Voice Amplifier for use with Motorola APX radios, Closed Bracket Configuration

201276-21

EPIC 3 RDI Voice Amplifier for use with Harris XL radios, Open Bracket Configuration

201276-22

EPIC 3 RDI Voice Amplifier for use with Harris XL radios, Closed Bracket Configuration

Power

Power Source

3 – AAA Alkaline batteries, intrinsically safe; compatible with rechargeable NiMH batteries

Battery Life

Designed to deliver 10 hours runtime @ 25% voice amplification duty cycle use and 100%

Bluetooth connectivity duty cycle use with compatible Bluetooth-enabled handheld field

radios. Runtimes may vary based on field radio Bluetooth configuration.

Environmental

High Heat and Flame

500ºF / 260º C for 5 min soak with a 10 second flame followed by a 6 inch drop.

Standard Heat and Flame

203º F / 95º C for 15 minute soak with a 10 second flame followed by a 6 inch drop

Radiant Heat

15 kW/m2 for 5 minutes at 7 inches +/- 1 inch from heat source followed by a 6 inch drop

Storage Temp

-30 C to +60 C

Humidity

MIL-STD 507.x PROC. II

Ingress Protection

IP66 and IP67

Drop & Tumble

6 ft drop all 6 sides – 30 minute tumble.

Regulatory Approvals and

Certifications

NFPA

NFPA 1981 approved (2002/2007/2013 Editions). Complies with NFPA 2013 Edition SCBA

Sound Transmission Index (STI) acoustic standards for voice intelligibility.

NIOSH

Meets NIOSH 42 CFR, Part 84 certification standard

ESD

IEC/EN61000-4-2

Intrinsic Safety Rating

UL 913, IS 6th and 7th Editions: Class I, II, III, Division 1, Groups C, D, E, F and G.

Ex ia IIB T3 Ga IP66/67; IEC standards IEC 60079-0: 2007-10 Edition 5; and IEC

60079-11:2011 Edition 6.0

3M Scott Fire & Safety

Personal Safety Division

Monroe Center, P.O. Box 569

Monroe, NC 28111

Phone 1-800-247-7257

E-Mail ScottMonroeCSR@scottsafety.com

Web

3MScott.com

H/S 7567_RevB_EN 2/19 ISO 9001 Registered.

Please recycle. Printed in USA © 3M 2018. All rights

reserved. 3M and Scott are trademarks of 3M.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 3M Scott is under license. Other trademarks and trade names are

those of their respective owners.