| 数据搜索系统,热门电子元器件搜索 |
|
TSC2012IDT 数据表(PDF) 24 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TSC2012IDT 数据表(HTML) 24 Page - STMicroelectronics |
|
24 / 54 page ![]() 5 Application information 5.1 Overview The TSC2011 is especially designed to accurately measure the current by amplifying the voltage across a shunt resistor connected to its input. This voltage drop Vsense is then amplified by an instrumentation amplifier providing a max. input offset voltage of 500 µV (25°C) for an input common voltage of 12 V. The TSC2011 is a fixed gain current sensing amplifier of 60 V/V. Thanks to a thin film resistor, the TSC2011 offers an extremely precise gain and a very high CMRR performance even in a high frequency range. Moreover, by fixing the output common mode voltage, the TSC2011 can be either used as unidirectional or bidirectional current sensing amplifier. The TSC2011 provides an extended input common range from - 20 V below the negative supply voltage, and up to 70 V allowing either low-side or high-side current sensing, while the TSC2011 device can operate from 2.7 to 5.5 V. The parameters are very stable in the full Vcc range and characterization curves show the TSC2011 characteristics at 2.7 V and 5.0 V. Moreover, the main specifications are guaranteed in an extended temperature range from -40 to 125 °C. 5.2 Theory of operation The main feature of the TSC2011 is the ability to work with an input common mode voltage largely beyond the power supply Vcc range (2.7 V to 5.5 V). It is ideal, for example for automotive applications where a reverse battery can be supported by the TSC2011 without any damage. It also works with 48 V battery applications as the TSC2011 can support and measure the current on line at voltage up to 70 V. No additional protective components are needed in that range. • Vcc < Vicm < 70 V In this case, the power supply of the TSC2011 is issued by the input and not only by the Vcc power supply. More precisely, a current is drawn by the common mode rail as depicted in the Figure 54. Power supply when Vicm > Vcc to power it. Figure 54. Power supply when Vicm > Vcc TSC2010, TSC2011, TSC2012 Application information DS13057 - Rev 4 page 24/54 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |