MODEL: 10JM

http://www.m-system.co.jp/

10JM SPECIFICATIONS

ES-0865 Rev.11 Page 1/3

High-density Signal Conditioners 10-RACK

POTENTIOMETER TRANSMITTER

(field-programmable)

Functions & Features

• Providing two DC outputs proportional to a potentiometer

or slidewire position input

• Microprocessor based

• Constant voltage excitation allows use with pots with total

resistances from 100 Ω – 10kΩ without affecting accuracy

• 75 % zero/span adjustments with minimal interaction

• Linearization data programmable via hand-held

programmer PU-2x

• Loop testing via hand-held programmer PU-2x

• Optional second channel output available at the front

terminals and at the Standard Rack connector

Typical Applications

• Tank levels

• Positions

• Linearizing non-linear signal characteristics by the

sensor's linking mechanism

MODEL: 10JM–1[1][2]–R[3]

ORDERING INFORMATION

• Code number: 10JM-1[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. 10JM-1A6-R/Q)

• Linearization data (max. 16 points)

Use Ordering Information Sheet (No. ESU-1669) to specify

linearization data when the I/O signals are non-linear.

• Specify the specification for option code /Q

(e.g. /C01)

INPUT POTENTIOMETER

1: Total resistance 100 Ω – 10 kΩ

[1] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

6: 1 – 5 V DC (Load resistance 500 Ω min.)

[2] OUTPUT 2

0: None

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Linearization: 16 points max. within the range of -15.00 –

+115.00 % input or output; represented as percentage of