MODEL: 10AP

10AP SPECIFICATIONS

ES-0851 Rev.9 Page 1/3

http://www.m-system.co.jp/

High-density Signal Conditioners 10-RACK

DC/FREQUENCY CONVERTER

Functions & Features

• Providing two pulse rate outputs in proportion to DC input

signal

Typical Applications

• Totalizing applications in combination with a counter

MODEL: 10AP–[1][2][3]–R[4]

ORDERING INFORMATION

• Code number: 10AP-[1][2][3]-R[4]

Specify a code from below for each of [1] through [4].

(e.g. 10AP-621-R/Q)

• Special input range (For codes Z & 0)

• Output frequency range (e.g. 0 – 500 Hz)

Frequencies of Output 1 and 2 are the same.

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

( 0 % input must be 0 mA.)

Voltage

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

( 0 % input must be 0 V.)

[2] OUTPUT 1

1: Open collector (max. 1 kHz)

2: 5 V pulse (max. 1 kHz)

5: Photo MOSFET relay pulse (max. 30 Hz)

[3] OUTPUT 2

0: None

1: Open collector

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. 0 to 120 %

Zero adjustment: 0 – 5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Specify input resistance value for code Z.

■ DC Voltage: 0 – 300V DC

Minimum span: 1V

Input resistance: 1 MΩ min.