MODEL: 10VF

http://www.m-system.co.jp/

10VF SPECIFICATIONS

ES-0817 Rev.11 Page 1/3

High-density Signal Conditioners 10-RACK

SIGNAL TRANSMITTER

(high speed response)

Functions & Features

• Converts DC input from a sensor into a standard

process signal

• Isolation between input and output

• 180-microsecond response

MODEL: 10VF–[1][2]0–R[3]

ORDERING INFORMATION

• Code number: 10VF-[1][2]0-R[3]

Specify a code from below for each [1] through [3].

(e.g. 10VF-6A0-R/Q)

• Special input range (For codes 0)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

OUTPUT 2

0: None

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 %; multi-turn screwdriver

adjustments (front)

Span adjustment: 95 to 105 %; multi-turn screwdriver

adjustments (front)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

■ DC Voltage: -300 – +300 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span