MODEL: 10PV

http://www.m-system.co.jp/

10PV SPECIFICATIONS

ES-0820 Rev.11 Page 1/3

High-density Signal Conditioners 10-RACK

P/I TRANSDUCER

Functions & Features

• Converting a standard pneumatic signal into a

proportional DC output

• Optional second channel output available at the front

terminals and at the Standard Rack connector

Typical Applications

• Converting a pneumatic system into a 4 – 20 mA for

indicating and controlling in DCS system

MODEL: 10PV-[1][2][3]-R[4]

ORDERING INFORMATION

• Code number: 10PV-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10PV-2A6-R/A2S/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] PNEUMATIC CONNECTION

2: Rc 1/4"

5: Rc 1/8" fitting

7: 1/4" NPT fitting

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

[3] OUTPUT 2

0: None

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Pressure Range

/A1S: 19.6 – 98.1 kPa

/A2S: 20 – 100 kPa

/A3S: 20.7 – 103.4 kPa

/A2: 0.2 – 1.0 bar

/A3: 3 – 15 psig

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear

Connection

Output: M3.5 screw terminals (torque 0.8 N·m) and card-

edge connector

Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female (torque

≤12 N·m)

Power input: Supplied from card-edge connector

Material

Housing: Flame-resistant resin (black)

Base: Die cast aluminium

Screw terminals: Nickel-plated steel

Isolation: Output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)