MODEL: 10VS4

http://www.m-system.co.jp/

10VS4 SPECIFICATIONS

ES-0886 Rev.8 Page 2/3

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector and M3.5

screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to output 3 to output

4 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front) (For Output 1 & 2; all 4

outputs are factory calibrated.)

Span adjustment: 95 to 105 % (front) (For Output 1 & 2; all

4 outputs are factory calibrated.)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

■ DC Voltage: 0 – 300 V DC

Minimum span: 3 mV

Offset: Max. 1.5 times span

Input span: Input Resistance

3 – 10 mV : ≥ 10 kΩ

10 – 100 mV : ≥ 10 kΩ

0.1 – 1 V : ≥ 100 kΩ

≥ 1 V : ≥ 500 kΩ

OUTPUT SPECIFICATIONS

With the input voltage code 3, 4, 5, 6 and current, the

output goes below 0 % when the input is open.

INSTALLATION

Current consumption: Approx. 60 mA with voltage output 1

& 3

Approx. 110 mA with current output 1 & 3

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 350 g (0.77 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.05 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output 1 to output 2 to output 3 to output 4 to

power)

1500 V AC @ 1 minute (input or output or power to ground)