BZX79C5V6.. datasheet(3/4 Pages) ONSEMI

3 / 4 page

www.onsemi.com

Top Mark Information (Continued)

General Requirements:

1.0 Cathode Band

2.0 First Line: F - Fairchild Logo

3.0 Second Line: Device name - For 1Nxx series: 4th to 5th characters of the device name.

For BZxx series: 5th to 6th characters of the device name.

4.0 Third Line: Device name - For 1Nxx series: 6th to 7th characters of the device name.

For BZXyy series: Voltage rating

5.0 Devices shall be marked as required in the device specification (PID or FSC Test Spec).

6.0 Maximum no. of marking lines: 3

7.0 Maximum no. of digits per line: 2

8.0 FSC logo must be 20 % taller than the alphanumeric marking and should occupy the 2 characters of the specified line.

9.0 Marking Font: Arial (Except FSC Logo)

10.0 First character of each marking line must be aligned vertically.

11.0 All device markings must be based on Fairchild device specification.

1st line: F - Fairchild Logo

2nd line: Device Name - 4th to 5th characters of the device name.

or 5th to 6th characters for BZXyy series

3rd line: Device Name - 6th to 7th characters of the device name.

or Voltage rating for BZXyy series

BZX79C5V6.. 数据表(PDF) 3 Page - ON Semiconductor