MODEL: 10TK

http://www.m-system.co.jp/

10TK SPECIFICATIONS

ES-0847 Rev.1 Page 1/4

High-density Signal Conditioners 10-RACK

THERMOCOUPLE TRANSMITTER

(fast response)

Functions & Features

• Accepting direct input from a thermocouple and providing

two standard process signals

• 5-segment linearization

• Burnout protection

• High-accuracy cold junction compensation

• Optional second channel output available at the front

terminals and at the Standard Rack connector

Typical Applications

• High-accuracy cold junction compensation benefits narrow

span measurements

• 0.1 μA burnout sensing enables long distance

transmission with minimum offset drifts

• Electric furnace (isolation)

• No burnout type can connect to a single T/C in parallel

with a recorder

MODEL: 10TK-[1][2][3]-R[4]

ORDERING INFORMATION

• Code number: 10TK-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10TK-2A6-R/BL/Q)

• Temperature range (e.g. 0 – 800°C)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT THERMOCOUPLE

1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

7: R (Usable range -50 to +1760°C, -58 to +3200°F)

8: S (Usable range -50 to +1760°C, -58 to +3200°F)

N: N (Usable range -270 to +1300°C, -454 to +2372°F)

0: Specify

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

[3] OUTPUT 2

0: None

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Burnout

blank: Upscale burnout

/BL: Downscale burnout

/BN: No burnout

CJC Sensor

blank: With Cold Junction Compensation Sensor

/N: Without Cold Junction Compensation Sensor

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating