MODEL: M2EXR

M2EXR SPECIFICATIONS

ES-5144 Rev.3 Page 1/6

http://www.m-system.co.jp/

Super-mini Signal Conditioners with

Display Mini-M M2E Series

RTD TRANSMITTER

(PC programmable)

Functions & Features

• Accepts direct input from a RTD and provides a linearized

process signal

• Adjustments with the front button

• Wide selection of RTD

• Leadwire resistance compensation

• OEL display with good visibility

Typical Applications

• Long distance transmission between the RTD and the

transmitter

Mode

Set

Up

Down

83

(3.27)

124

(4.88)

29.5

(1.16)

mm (inch)

MODEL: M2EXR–[1][2]

ORDERING INFORMATION

• Code number: M2EXR-[1][2]

Specify a code from below for each [1] and [2].

(e.g. M2EXR-M2/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01/SET)

INPUT – Field-selectable

RTD

JPt 100 (JIS'89), Pt 100 (JIS'89), Pt 100 (JIS'97, IEC),

Pt 50Ω (JIS'81), Ni 508.4Ω, Pt 1000, Ni 100, Cu 10 @ 25℃

OUTPUT – Field-selectable

◆ DC Output

• Current output: 0 - 20 mA DC

• Voltage output: -5 - +5 V DC

• Voltage output: -10 - +10 V DC

[1] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5144)

RELATED PRODUCTS

• M2E configurator software (model: M2ECFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual (EM-5147) for the M2E configurator for

applicable cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (gray)

Isolation: Input to output to power

Overrange output: Approx. -10 to +110 % (Not available for

current output not greater than 0 mA)

Input zero fine adj. range: -10 to +10℃ (front button)

Input span fine adj. range: -10 to +10℃ (front button)

Output zero fine adj. range: -5 to +5% (front button)

Output span fine adj. range: 95 to 105% (front button)

Burnout protection: Upscale standard; downscale or no

burnout optional by programming

Linearization: Standard

Output setting: DIP Switch on side panel (refer to the