MODEL: M2LPM

M2LPM SPECIFICATIONS

ES-5054 Rev.5 Page 1/3

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

POTENTIOMETER TRANSMITTER

(field- and PC-configurable)

Functions & Features

• Provides a DC output proportional to a potentiometer or

slidewire position input

• Easy ‘One-Step Cal’ calibration using the front three

control buttons without needing a PC; PC software is also

usable.

• Input range, output type and range are configurable

23 (.91)

76

(2.99)

124

(4.88)

mm (inch)

MODEL: M2LPM-1[1]-M[2]

ORDERING INFORMATION

• Code number: M2LPM-1[1]-M[2]

Specify a code from below for each [1] and [2].

(e.g. M2LPM-1Z1-M/Q)

• Input range (e.g. 0 – 500 Ω)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/S01)

INPUT

1: Total resistance 50 Ω – 10 kΩ

(Input range are fully programmable out of the range

specified when ordering by setting up the DIP switch and

using ‘One-Step-Cal’ Calibration. PC Configurator is also

available.)

[1] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V1: Range -2.5 – +2.5 V DC

V2: Range -10 – +10 V DC

Output ranges are fully programmable out of the range

specified when ordering by setting up the DIP switch and

using ‘One-Step-Cal’ Calibration. PC Configurator is also

available.

POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

RELATED PRODUCTS

• PC configurator software (model: M2LPMCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -15 to +115 %

(Negative current output is not provided.)

Zero adjustment: -15 to +15 % (front)

Span adjustment: 85 to 115 % (front)

Burnout protection: Upscale, downscale or no burnout

selectable with DIP switches

Status indicator LED: Tri-color (green/amber/red) LED;

Blinking patterns indicate operation status of the

transmitter.

Configuration

‘One-Step Cal’ calibration: With I/O type and the full-scale

range configured via the side DIP switches, precise 0 % and

100 % ranges are calibrated via the front control buttons

with a help of LED.

PC configurator: Via Windows PC connected to the front