MODEL: M2LMS

M2LMS SPECIFICATIONS

ES-5048 Rev.11 Page 3/4

http://www.m-system.co.jp/

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

FRONT VIEW

(C) High/Low Limit Selector

The front cover cannot be turned open by 180 deg.

when there is no extra space between units.

(A) Polarity Indicator LED

(B) High/Low Limit Display

(E) Zero Adj.

(F) Span Adj.

(D) UP/DOWN Control

Top: High Limit

Bottom: Low Limit

• How to Set High Limit

Turn the High/Low Limit Selector (C) to the top.

The High/Low Limit Display (B) shows the current high limit

(-10.0 – +105 %). Press UP/DOWN Control (D) until the

display shows a desired set value.

The Polarity Indicator LED (A) is red when the set value is in

positive range, green when in negative range.

The high limit is factory set to 100 %.

• How to Set Low Limit

Turn the High/Low Limit Selector (C) to the bottom.

The High/Low Limit Display (B) shows the current low limit

(-10.0 – +105 %). Press UP/DOWN Control (D) until the

display shows a desired set value.

The Polarity Indicator LED (A) is red when the set value is in

positive range, green when in negative range.

The low limit is factory set to 0 %.