MODEL: FPP

FPP SPECIFICATIONS

ES-1461 Rev.10 Page 2/4

http://www.m-system.co.jp/

Pulse width time requirement: 10 μsec. min. for high and

low levels

Waveforms: Square or sine

Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level

Input impedance: 10 kΩ min.

OUTPUT SPECIFICATIONS

■ Low Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Saturation voltage: 0.5 V DC

■ High Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 10 kHz

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 10 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5V

Load resistance:

≥ 250 Ω for 5 V

≥ 600 Ω for 12 V

≥ 1200 Ω for 24 V

■ Photo MOSFET Relay Pulse

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω

INSTALLATION

Power input

•AC: Approx. 4.5 VA

•DC: 24 V approx. 70 mA

110 V approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 180 g (0.40 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)