MODEL: FJDL

FJDL SPECIFICATIONS

ES-1474 Rev.12 Page 2/3

http://www.m-system.co.jp/

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Linearization: 16 points max. represented as percentage of

full-scale

Adjustments: Programming Unit (model: PU-2x);

linearization data, zero and span, simulating output, etc.

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON.)

SUPPLY OUTPUT

Output voltage: 24 – 28 V DC with no load

Current rating: ≤ 22 mA DC

• Shortcircuit Protection

Current limited: 30 mA max.

Protected time duration: No limit

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

LINEARIZATION

•No linearization: The output is proportional to the input.

•Segment data: 16 points (15 segments) max. within the

range of -15.00 to +115.00 % input or output represented

as percentage of fullscale

•Square root extraction

Low-end cutout: 5 % (output); curve characteristics as in the

figure below

INPUT

6%

5%

0

• Thermocouple linearizable range

USABLE RANGE

T/C

°C

°F

(PR)

0 to 1760

32 to 3200

K (CA)

-270 to +1370

-454 to +2498

E (CRC)

-270 to +1000

-454 to +1832

J (IC)

-210 to +1200

-346 to +2192

T (CC)

-270 to +400

-454 to +752

B (RH)

0 to 1820

32 to 3308

R

-50 to +1760

-58 to +3200

S

-50 to +1760

-58 to +3200

Note: For the temperatures that range below 0°C, the

transmitter may partially not satisfy the described accuracy.

Consult factory.

• RTD linearizable range

USABLE RANGE

RTD

°C

°F

JPt 100 (JIS ’89)

-200 to +500

-328 to +932

Pt 100 (JIS ’89)

-200 to +650

-328 to +1202

Pt 100 ( JIS ’97, IEC)

-200 to +650

-328 to +1202

Pt 50 Ω (JIS ’81)

-200 to +500

-328 to +932

Ni 508.4 Ω

-50 to +200

-58 to +392

Note: Pt 100 (JIS ’89) is deviated from Pt 100 (JIS ’97) only

within the described accuracy.

INSTALLATION

Power input

•AC: Approx. 4.5 VA

•DC:

24 V approx. 95 mA

110 V approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 220 g (0.49 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % with segment gain ≤ 1 [±0.1 % × gain]

with segment gain > 1

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)