MODEL: FJT

FJT SPECIFICATIONS

ES-1463 Rev.11 Page 2/3

http://www.m-system.co.jp/

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Linearization: Standard

Cold junction compensation: CJC sensor attached to the

input terminals

Adjustments: Programming Unit (model: PU-2x);

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON.)

• T/C type

• temp. range

• zero and span

• simulating output

• Others

INPUT SPECIFICATIONS

Minimum span: 3 mV

Offset: Max. 3 times span

Input resistance: 20 kΩ min.

Burnout sensing: 0.1 μA

Minimum span in °C and °F

(PR): 370°C, 670°F

K (CA): 75°C, 140°F

E (CRC): 50°C, 90°F

J (IC): 60°C, 110°F

T (CC): 75°C, 140°F

B (RH): 780°C, 1410°F

R: 360°C, 650°F

S: 380°C, 690°F

WRe 5-26: 200°C, 360°F

N: 110°C, 200°F

Note: The described accuracy may be partially not satisfied

when the temperature ranges below 0°C. Consult factory.

If not specified, the input range is shown below.

(PR): 0 to 1600°C

K (CA): 0 to 1000°C

E (CRC): 0 to 500°C

J (IC): 0 to 500°C

T (CC): 0 to 300°C

B (RH): 0 to 1800°C

R: 0 to 1600°C

S: 0 to 1600°C

WRe 5-26: 0 to 2000°C

N: 0 to 1000°C

INSTALLATION

Power input

•AC: Approx. 4.5 VA

•DC: 24 V approx. 70 mA

110 V approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 220 g (0.49 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Linearization accuracy: ±0.05 %

Cold junction compensation error: ±0.5°C or ±0.9°F

(at 20°C ±10°C or 68°F ±18°F)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.8 sec. (0 – 90 %)

Burnout response: ≤ 10 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)