MODEL: FLC

FLC SPECIFICATIONS

ES-1435 Rev.6 Page 2/3

http://www.m-system.co.jp/

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input or output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Excitation adjustment: 2 – 10 V (front)

Zero adjustments (tare): 0 – 80 % (front)

(Excitation voltage: factory default)

Span adjustment: 100 – 20 % (front)

(Excitation voltage: factory default)

INPUT SPECIFICATIONS

■ Input: Bridge voltage from load cells

• Strain Gauge

Rated output from strain gauge: 1 – 20 mV/V;

Input to the transmitter must be over 3 mV.

• Excitation: 2 – 10 V adjustable (5 V standard)

Maximum current: 35 mA

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Power input

•AC: Approx. 5 VA

•DC: 24 V approx. 120 mA

110 V approx. 40 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (input ≥ 3 mV)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) (input ≥ 3

mV)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Power input code R:

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)