MODEL: FLCS

FLCS SPECIFICATIONS

ES-1404 Rev.2 Page 1/3

http://www.m-system.co.jp/

Space-saving Plug-in Signal Conditioners F-UNIT

STRAIN GAUGE TRANSMITTER

(isolated)

Functions & Features

• Providing a DC output signal proportional to a bridge type

strain gauge utilized in load cells, pressure transducers

• Supplying required excitation voltage

• Drives bridges of various ratings

• Excitation adjustable from 2 V to 10 V

• Wide-range adjustment: 0 – 80 % for zero, 20 – 100 % for

span

• Fast response type available

• High-density mounting

Typical Applications

• Weighing system for tanks, hoppers, silos

• Weighing system using cranes

• Float level meter utilizing strain gauges

26 (1.02)

100

(3.94)

mm (inch)

137

(5.39)

MODEL: FLCS-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: FLCS-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. FLCS-2A-L/K/Q)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT STRAIN GAUGE

1: 1 mV/V

12: 1.25 mV/V

15: 1.5 mV/V

2: 2 mV/V

3: 3 mV/V

4: 4 mV/V

5: 5 mV/V

6: 10 mV/V

7: 20 mV/V

0: Specify (strain gauge and excitation)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

L: 170 – 264 V AC

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL