MODEL: KAP

KAP SPECIFICATIONS

ES-3581 Rev.11 Page 2/4

http://www.m-system.co.jp/

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

Minimum span: 10 mV

Offset: Max. 1.5 times span

Input resistance

Span 10 – 100 mV : ≥ 10 kΩ

Span 0.1 – 1 V : ≥ 100 kΩ

Span ≥ 1 V : ≥ 1 MΩ

OUTPUT SPECIFICATIONS

Frequency range: 0 – 0.01 Hz through 1 kHz

ON pulse width: Approx. 50 % of the duty of the maximum

output frequency (500 μsec. – 0.8 sec.)

Pulse width is forcibly limited to approx. 0.8 sec. if the value

[approx. 50 % of the duty of the maximum output

frequency] is not smaller than 0.8 sec.

■ Open Collector: 50 V DC @50 mA (resistive load)

Saturation voltage: 0.6 V DC

■ AC/DC Switch: 100 V AC @200 mA (cosø=1)

150 V DC @200 mA (resistive load)

Voltage drop: 6 V or less

INSTALLATION

Power input

• AC: Operational voltage range: rating ±10 %,

50/60 ±2 Hz, approx. 2 VA

•DC: Operational voltage range: rating ±10 %,

ripple 10 %p-p max., approx. 2 W (80 mA at 24 V)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 450 g (0.99 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)