MODEL: KMS

KMS SPECIFICATIONS

ES-3522-CE Rev.3 Page 1/3

https://www.m-system.co.jp/

Plug-in Signal Conditioners K-UNIT

POTENTIOMETER TRANSMITTER

(CE, isolated)

Functions & Features

• Providing a DC output proportional to a potentiometer or

slidewire position input

• Constant voltage excitation allows the connection of pots

with total resistance from 100 Ω – 10 kΩ without affecting

accuracy

• 50 % zero/span adjustments with minimal interaction

• Signal isolation

• Fast response type available

• High-density mounting

Typical Applications

• Tank levels

• Positions

50

(1.97)

123

(4.84)

80

(3.15)

mm (inch)

MODEL: KMS–[1]–[2][3]/CE

ORDERING INFORMATION

• Code number: KMS-[1]-[2][3]/CE

Specify a code from below for each of [1] through [3].

(e.g. KMS-A-H/CE)

• Special output range (For codes Z & 0)

INPUT POTENTIOMETER

Total resistance 100 Ω – 10 kΩ

[1] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 3000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 20 kΩ min.)

5W: -5 – +5 V DC (Load resistance 10 kΩ min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[2] POWER INPUT

AC Power

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

S: 12 V DC

R: 24 V DC

[3] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Standards & Approvals (must be specified)

/CE: CE marking

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

Screw terminal: Chromated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: 0 – 50 % of total resistance (front)

Span adjustment: 50 – 100 % of total resistance (front)

INPUT SPECIFICATIONS

Minimum span: 50 % of total resistance

Excitation: 0.5 V DC

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max. at ≥ 3 V