GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

Page 3 of 4

LEDD24_24_A – Rev. 2018-1.1

Specifications subject to change without notice.

AC input recommended circuit

LEDD24_24_A Series

Constant current power DIP24 LED Driver with analogue dimming -

Wide Input - Non-Isolated & Regulated

1. If the product is applied to high voltage condition (higher than 40V),

the input terminal must be provided with an additional capa-

citor

(≥47μF/100V) to prevent voltage spike from damaging the module.

2. The output cathode cannot be connected with the input grounding,

or

it will damage the module.

Typical application circuit

Application circuits in series

Application circuits in series and parall

EMC solution-recommended circuit

EMC recommended circuit

EMC solution-recommended circuit PCB layout

Recommended parameter:

Components

Specifications

C1

Safety-regulated X1 film capacitor,

0.1μF/3000VAC

C2

100μF/100V electrolytic capaci-

tor）

D1, D2, D3, D4

Rectifier diode (2A/200V)）

Recommended parameter:

Components

Specifications

FUSE

Selected based on the actual

input

current from the customer

MOV

S10K35

TVS

SMC54A

LDM

56μFH

C0

120μF/63V