MODEL: M2PP

M2PP SPECIFICATIONS

ES-5061 Rev.22 Page 1/4

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

PULSE ISOLATOR

Functions & Features

• Galvanically isolates pulse rate signals

• Input frequency = output frequency

• Various outputs (open collector, voltage pulses and dry

contact AC/DC switch)

Typical Applications

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

Model

23 (.91)

76

(2.99)

124

(4.88)

mm (inch)

MODEL: M2PP–[1][2][3]–[4][5]

ORDERING INFORMATION

• Code number: M2PP-[1][2][3]-[4][5]

Specify a code from below for each of [1] through [5].

(e.g. M2PP-33N-M2/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT

1: Mechanical contact (max. 30 Hz)

2: Open collector (max. 10 kHz)

3: Voltage pulse (max. 10 kHz)

9: Clamp-on pulse sensor CLSP

(‘/UL’ is not selectable for ‘Standards & Approvals’ code.)

[2] OUTPUT

1: Low frequency open collector (max. 30 Hz)

2: High frequency open collector (max. 10 kHz)

3: 5 V pulse (max. 10 kHz)

4: 12 V pulse (max. 10 kHz)

5: 24 V pulse (max. 10 kHz)

7: Dry contact AC/DC switch (max. frequency 30 Hz)

(‘/UL’ is not selectable for ‘Standards & Approvals’ code.)

[3] OUTPUT LOGIC

N: The same as the input

R: Inverted

[4] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(‘/UL’ is not selectable for ‘Standards & Approvals’ code.)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(‘/UL’ is not selectable for ‘Standards & Approvals’ code.)

[5] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

/CE: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)

RELATED PRODUCTS

• Clamp-on pulse sensor (model: CLSP)