MODEL: M2PRU

M2PRU SPECIFICATIONS

ES-5076 Rev.18 Page 3/6

http://www.m-system.co.jp/

OUTPUT SPECIFICATIONS

■ Open Collector: 50 V DC @200 mA (resistive load)

Maximum frequency: 100 kHz

Saturation voltage: 0.6 V DC

■ Voltage Pulse

Maximum frequency: 100 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5 V

Load resistance:

≥ 500 Ω for 5 V

≥ 1200 Ω for 12 V

≥ 4800 Ω for 24 V

■ AC/DC Switch

132 V AC @200 mA (cos ø = 1)

30 V DC @200 mA (resistive load)

Maximum frequency: 1 kHz

Internal voltage drop: ≤ 3 V

INSTALLATION

Power Consumption

•AC:

Approx. 4 VA at 100 V

Approx. 5 VA at 200 V

Approx. 6 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE

Response time: 25 μsec. + input cycle + output cycle

(time required for the first pulse to be output from a train of

pulse input)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category II (output)

Installation Category II (power)

Pollution Degree 2

Open collector/voltage pulse output

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

AC/DC switch output

Input or output to power: Reinforced insulation (300 V)

Input to output: Reinforced insulation (300 V)

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)