MODEL: KAC

KAC SPECIFICATIONS

ES-3565 Rev.8 Page 1/3

http://www.m-system.co.jp/

Plug-in Signal Conditioners K-UNIT

AC TRANSMITTER

Functions & Features

• Converting an alternating current/voltage into a standard

process signal

• True RMS sensing

• Isolation up to 2000 V AC

• High-density mounting

Typical Applications

• Converting a large AC current in combination with a shunt

resistor, or a narrow span AC voltage

50

(1.97)

123

(4.84)

80

(3.15)

mm (inch)

MODEL: KAC–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: KAC-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. KAC-A1A-B/Q)

• Special input and output ranges (For codes AZ, A8, Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT

Current

AA: 0 – 10 mA AC (Input resistance 100 Ω)

AB: 0 – 50 mA AC (Input resistance 20 Ω)

AC: 0 – 100 mA AC (Input resistance 10 Ω)

AD: 0 – 500 mA AC (Input resistance 1 Ω)

AZ: Specify current (See INPUT SPECIFICATIONS)

(0 % input must be 0 mA.)

Voltage

A1: 0 – 100 mV AC (Input resistance 100 kΩ min.)

A2: 0 – 500 mV AC (Input resistance 100 kΩ min.)

A3: 0 – 1 V AC (Input resistance 100 kΩ min.)

A4: 0 – 5 V AC (Input resistance 100 kΩ min.)

A5: 0 – 10 V AC (Input resistance 100 kΩ min.)

A6: 0 – 120 V AC (Input resistance 100 kΩ min.)

A7: 0 – 150 V AC (Input resistance 100 kΩ min.)

A8: Specify voltage (See INPUT SPECIFICATIONS)

(0 % input must be 0 V.)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[3] POWER INPUT

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

S: 12 V DC

R: 24 V DC

[4] OPTIONS

blank: none

/Q: Options other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel