MODEL: KWDNY

KWDNY SPECIFICATIONS

ES-3599 Rev.9 Page 1/3

http://www.m-system.co.jp/

Plug-in Signal Conditioners K-UNIT

CURRENT LOOP SUPPLY

(two isolated outputs; with square root extractor)

Functions & Features

• Powering a 4 – 20 mA DC current loop

• Square root extraction

• Shortcircuit protection

• Applicable to smart transmitters

• Isolation up to 2000 V AC

• High-density mounting

Typical Applications

• Various 2-wire transmitters

• Square root extractor application (4 – 20 mA input)

50

(1.97)

132

(5.20)

80

(3.15)

mm (inch)

MODEL: KWDNY–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: KWDNY-[1][2]-[3][4]

Specify a code from below for each [1]through [4].

(e.g. KWDNY-A6-B/Q)

• Special output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Note: When the user requires a current and a voltage

output, specify the current to be the Output 1 which allows

a greater load.

INPUT

Current

4 – 20 mA DC (Input resistance 250 Ω)

[1] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

[2] OUTPUT 2

Current

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

B: 2 – 10 mA DC (Load resistance 700 Ω max.)

C: 1 – 5 mA DC (Load resistance 1400 Ω max.)

D: 0 – 20 mA DC (Load resistance 350 Ω max.)

E: 0 – 16 mA DC(Load resistance 430 Ω max.)

F: 0 – 10 mA DC (Load resistance 700 Ω max.)

G: 0 – 1 mA DC (Load resistance 7000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

Same range availability as Output 1

[3] POWER INPUT

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

S: 12 V DC

R: 24 V DC

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL