MODEL: M2YV

M2YV SPECIFICATIONS

ES-5020 Rev.5 Page 1/3

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

ISOLATOR

Functions & Features

• Galvanically isolating the input and output signals

• Universal power input

• High-density mounting

Typical Applications

• Isolation between control room and field instrumentation

• Eliminating ground loops

Model

SPAN

ZERO

23 (.91)

76

(2.99)

124

(4.88)

mm (inch)

MODEL: M2YV–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: M2YV-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. M2YV-6A-M/Q)

• Specify the specification for option code /Q

(e.g. /C01/V01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

Voltage

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

INSTALLATION

Power Consumption

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)