MODEL: M2XM2

M2XM2 SPECIFICATIONS

ES-5093 Rev.10 Page 1/4

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

POTENTIOMETER TRANSMITTER

(PC programmable)

Functions & Features

• Provides a DC output proportional to a potentiometer or

slidewire position input

• PC programmable

• Potentiometer’s zero/span points can be captured by on-

site calibrations

Typical Applications

• Tank levels

• Positions: Compensating non-linear signal from the linking

mechanism of a position detector

Model

23 (.91)

76

(2.99)

mm (inch)

124

(4.88)

MODEL: M2XM2–1[1]–[2][3]

ORDERING INFORMATION

• Code number: M2XM2-1[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M2XM2-1Z1-R/CE/Q)

• Input range (e.g. 0 – 500 Ω)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/S01/SET)

INPUT POTENTIOMETER

1: Total resistance 100 Ω – 10 kΩ

(Configurator software is used to change input range

(total resistance).)

[1] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V1: Range -2.5 – +2.5 V DC

V2: Range -10 – +10 V DC

(Configurator software is used to change output over the

described range of the selected suffix code. For changing

out of this range, set the Output Range Selectors inside the

unit before software adjustment.)

[2] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(90 – 264 V for UL)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

[3] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

/CE: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5093)

RELATED PRODUCTS

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.