MODEL: M2XRP2

http://www.m-system.co.jp/

M2XRP2 SPECIFICATIONS

ES-5059 Rev.12 Page 1/6

Super-mini Signal Conditioners Mini-M Series

ENCODER SPEED TRANSMITTER

(PC programmable; built-in excitation)

Functions & Features

• Converts a two-phase forward and reverse rotation

pulse signal with 90 degree phase difference into a forward

and reverse speed signal

• Built-in excitation

• PC programmable input and output ranges

• Input pulse monitoring LED

• Direct RS-422 input

Typical Applications

• Measuring moving speed of a machine with a rotary

encoder

29.5 (1.16)

76

(2.99)

mm (inch)

124

(4.88)

Model

MODEL: M2XRP2-[1][2][3]-[4][5]

ORDERING INFORMATION

• Code number: M2XRP2-[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. M2XRP2-000-M2/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

• Non-specified orders will be shipped at default factory

settings (M2XRP2-000: Open collector input/12 V

excitation/4 – 20 mA output). However, a power suffix code

must be specified.

If you specify a full code number without specific calibration

ranges, the input frequency is factory set to the maximum

range available for the selected input code and the output is

set to the default range. Use Ordering Information Sheet

(No. ESU-5059).

Note: Must be used with its socket. NOT installable to a

multi-unit installation base. (e.g. model: M2BS-16)

[1] INPUT

0: User-calibrated (Factory default: open collector, 0 – 100 kHz)

If the unit is to be factory-calibrated to a specific

input type, please select from the following:

A: Open collector

B: Voltage pulse

J: RS-422 line driver pulse

[2] EXCITATION

0: User-calibrated (Factory default: 12 V DC / 5 mA)

If the unit is to be factory-calibrated to a specific

voltage value, please select from the following:

1: 5 V DC / 5 mA

4: 12 V DC / 5 mA

[3] OUTPUT

0: User-calibrated (Factory default: 4 – 20 mA)

If the unit is to be factory-calibrated to a specific

output type, please select from the following:

Current

Z1: Range 0 – 20 mA DC

Voltage

V1: Range -2.5 – +2.5 V DC

V2: Range -10 – +10 V DC

(Configurator software is used to change output over the

described range of the selected suffix code. For changing

out of this range, set the Output Range Selectors inside the

unit before software adjustment.)

[4] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(90 – 264 V for UL)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)