MODEL: M3SXM

M3SXM SPECIFICATIONS

ES-7704 Rev.6 Page 1/3

http://www.m-system.co.jp/

Super-space-saving Signal Conditioners

M3S-UNIT Series

POTENTIOMETER TRANSMITTER

(PC programmable)

Functions & Features

• Provides a DC output proportional to a potentiometer or

slidewire position input

• Linearization and burnout protection

• PC programmable

• Universal AC/DC power input

• High-density mounting

• Power and status indicator LED

12 (.47)

mm (inch)

110.5 (4.35)

106

(4.17)

MODEL: M3SXM–1[1]–[2][3]

ORDERING INFORMATION

• Code number: M3SXM-1[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M3SXM-1Z1-R/Q)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

INPUT

1: Total resistance 100 – 5000 Ω

(Configurator software is used to change the input range.)

[1] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

[2] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Universal

AD: 100 – 240 V AC / 24 – 240 V DC (universal)

(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /

21.6 - 264 V DC, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: M3SCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Small-sized front terminal structure

Connection: Euro type connector terminal

Housing material: Flame-resistant resin (gray)

Isolation: Input to output to power

Overrange output: -2 – +102 %

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout: Upscale standard; downscale or no burnout

optional by programming

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type, user’s

linearization table (max. 101 points, specified within -2 to