MODEL: M3SXT

M3SXT SPECIFICATIONS

ES-7702 Rev.6 Page 1/4

http://www.m-system.co.jp/

Super-space-saving Signal Conditioners

M3S-UNIT Series

THERMOCOUPLE TRANSMITTER

(PC programmable)

Functions & Features

• Accepts a thermocouple input and provides an isolated,

linearized DC signal

• Cold junction compensation, linearization and burnout

protection

• PC programmable

• Universal AC/DC power input

• High-density mounting

• Power and status indicator LED

12 (.47)

mm (inch)

110.5 (4.35)

106

(4.17)

MODEL: M3SXT–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: M3SXT-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M3SXT-2Z1-R/Q)

• Temperature range (e.g. 0 – 1000°C)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT THERMOCOUPLE

1: (PR)

2: K (CA)

3: E (CRC)

4: J (IC)

5: T (CC)

6: B (RH)

7: R

8: S

N: N

0: Specify (Please provide a emf table.)

(Configurator software is used to change the input type and

precise range.)

[2] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

[3] POWER INPUT

AC Power

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Universal

AD: 100 – 240 V AC / 24 – 240 V DC (universal)

(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /

21.6 - 264 V DC, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: M3SCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.