MODEL: M5VF

M5VF SPECIFICATIONS

ES-2464 Rev.14 Page 1/3

http://www.m-system.co.jp/

Super-mini Terminal Block Signal Conditioners M5-UNIT

SIGNAL TRANSMITTER

(high speed response)

Functions & Features

• Converts a DC input into an isolated DC signal

• Ultra-high speed response 150 μsec.

• High-density mounting

• Power LED

25 (.98)

97

(3.82)

41 (1.61)

mm (inch)

MODEL: M5VF-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M5VF-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M5VF-4W4W-R/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/V01/S01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 249 Ω)

B: 2 – 10 mA DC (Input resistance 499 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 49.9 Ω)

E: 0 – 16 mA DC (Input resistance 61.9 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 20 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

(Not selectable with the power input code M)

Voltage

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 8000 Ω min.)

(For the input suffix codes 4W and 5W only)

5W: -5 – +5 V DC (Load resistance 4000 Ω min.)

(For the input suffix codes 4W and 5W only)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

(Not selectable with the power input code M)

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(CE not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment

TERMINAL SCREW MATERIAL

/S01: Stainless steel