MODEL: M5VS

M5VS SPECIFICATIONS

ES-2468 Rev.17 Page 2/3

http://www.m-system.co.jp/

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment

/VN: Sealed adjustment holes

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Terminal block

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +110 % at 1 – 5 V

Zero adjustment: -2 to +2 % (front)

(±1 % with the input suffix codes 4W and 5W selected)

Span adjustment: 98 to 102 % (front)

(99 to 101 % with the input suffix codes 4W and 5W

selected.)

Power indicator LED: Green LED turns on when the power is

supplied.

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Specify input resistance value among followings for code Z.

20Ω, 49.9Ω, 61.9Ω, 100Ω, 249Ω, 499Ω, 1000Ω

■ DC Voltage

Input resistance: 1 MΩ min. (10 kΩ min. at power loss)

•Input code 0 (Not CE)

Voltage range: -300 – +300 V DC

Minimum span: 100 mV

Offset: Max. 1.5 times span

•Input code 01 (CE)

Voltage range: -70 – +70 V DC

Minimum span: 100 mV

Offset: Max. 1.5 times span

•Input code 02 (Not CE)

Voltage range: 0 – 500 V DC

Minimum span: 200 V

Offset: Max. 1.5 times span

Input at 100%: min. 300 V

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage

•Output code 0 (CE)

Voltage range: -10 – +10 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.

Max. 1.25 mA output drive for negative voltage.

Min. 1 MΩ when output < 1 V.

•Output code 01 (Not CE)

Voltage range: -1 – +1 V DC

Minimum span: 10 mV

Offset: Max. 1.5 times span

Load resistance: Min. 100 kΩ

Min. 1 MΩ for negative voltage

INSTALLATION

Power Consumption

•AC:

Approx. 2 VA at 100 V

Approx. 3 VA at 200 V

Approx. 3 VA at 264 V

•DC: Approx. 2 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 0 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 80 g (2.8 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

±0.2 % for the input code 02

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

±0.02 %/°C (±0.01 %/°F) at input <1 V and output <5 mA

±0.03 %/°C (±0.02 %/°F) for the input code 02

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength (input to output to power to ground)

DC powered: 2000 V AC @1 minute

AC powered: 1500 V AC @1 minute

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581