MODEL: M6DXF1

M6DXF1 SPECIFICATIONS

ES-7847 Rev.8 Page 6/6

http://www.m-system.co.jp/

LEAD-TIME COMPUTING

The module operates a lead-time equation.

where

Parameters

T:

Lead-time constant (0.5000 to 100.0000 seconds)

RAMP BUFFER

The modules output does not change faster than a preset

maximum rate, positive CP and negative CN, no matter

how fast its input changes.

CP:

Maximum rate of positive output change

(0.0000 to 200.0000%/second)

CN:

Maximum rate of negative output change

(0.0000 to 200.0000%/second)

HIGH / LOW LIMIT

The output does not go above the preset high limit or

below the preset low limit.

High and Low limits are independently selectable.

USER’S TABLE LINEARIZATION

The input is converted into a linearized output according

to the user specified segment data table, defined with pairs

of X (input) and Y (output) values.

2 to 101 segment points can be specified.

INVERTED OUTPUT

The output is inversely proportional to the input.

where

SQUARE ROOT EXTRACTION (orifice, venturi)

The output is square root of input.

___

where

INPUT

t

OUTPUT

t

0

0

T

INPUT

t

OUTPUT

t

0

0

CP

CN

where

where

where

OTHER FUNCTIONS

The low-end cutout point can be set within

0.0000 – 99.9999% of input signal.

Specifications are subject to change without notice.