MODEL: M6DXF1

M6DXF1 SPECIFICATIONS

ES-7847 Rev.8 Page 1/6

http://www.m-system.co.jp/

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

FUNCTION MODULE

(PC programmable)

Functions & Features

• Single input filter and function module

• 12 types of functions are PC programmable

• 5.9-mm wide ultra-slim design

• Low profile allows the M6D module mounted in a 120-mm

deep panel

• High-density mounting

• Power and status indicator LEDs

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: M6DXF1–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6DXF1-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6DXF1-Z1Z1-R/UL/Q)

• Input range (e.g. 4 – 20 mA DC)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

[1] INPUT

Current

Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

[2] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Standards & Approvals

blank: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7847)

FUNCTIONS

PC Configurator Software is used to program the function.

Filter, linearization and limiter functions can be combined.

• Filter / Lag

· Moving average output

· Dead time computing

· Delay buffer (first order lag)

· Lead time computing

· Ramp buffer

• Linearization

· User’s table linearization

· Inverted output

· Square root extraction (orifice, venturi)

• Limiter

· High / Low limit

Factory default function setting

Filter: Moving average

(H = 0.1, N = 1, U = 0, L = 0)

Linearization: None

Limiter: Low limit = -2 %, High limit = 102 %