MODEL: M6NCTC

M6NCTC SPECIFICATIONS

ES-7902 Rev.7 Page 1/4

http://www.m-system.co.jp/

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

CT TRANSMITTER

(clamp-on current sensor)

Functions & Features

• Converts AC current signal into a low-ripple standard

process signal suitable to be handled for computer inputs

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

• High-density mounting

• Power indicator LED

mm (inch)

7.5 (.30)

102

(4.02)

102

(4.02)

MODEL: M6NCTC–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6NCTC-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6NCTC-56004W-R/Q)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

Order Clamp-on current sensor separately.

[1] INPUT

Sensor CLSE

5R5: 0 – 5 A AC

550: 0 – 50 A AC

5100: 0 – 100 A AC

5200: 0 – 200 A AC

5400: 0 – 400 A AC

5600: 0 – 600 A AC

Sensor CLSB (CE not available)

210: 0 – 10 A AC

215: 0 – 15 A AC

220: 0 – 20 A AC

230: 0 – 30 A AC

240: 0 – 40 A AC

250: 0 – 50 A AC

260: 0 – 60 A AC

275: 0 – 75 A AC

2100: 0 – 100 A AC

2125: 0 – 125 A AC

2150: 0 – 150 A AC

2175: 0 – 175 A AC

2200: 0 – 200 A AC

2225: 0 – 225 A AC

2250: 0 – 250 A AC

2300: 0 – 300 A AC

2350: 0 – 350 A AC

2400: 0 – 400 A AC

2500: 0 – 500 A AC

2600: 0 – 600 A AC

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

G: 0 – 1 mA DC (Load resistance 11 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 20 kΩ min.)

5W: -5 – +5 V DC (Load resistance 10 kΩ min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• Clamp-on current sensor (model: CLSB)

• Clamp-on current sensor (model: CLSE)

(Select “CLSE-x/CE” to comply with CE for the combination

with the sensor.)